Lesson Objectives
- How to flush off joinery
- How to add finishing touches
- How to assess accuracy
- What you can learn next
In this video I’ll be showing you how to accurately mark out the lap joint, dovetail halving joint, bridle joint, and through mortice and tenon joint.
Series Summary
In this short series of videos, you will learn the basic principles behind sizing material, accurate layout, joint cutting, assembly, and finishing. This is a great project to test yourself with to see how your skills progress. Not only in terms of accuracy, but speed as well.
When teaching this project to students, we assess the joints by testing what shims we can fit into the gaps. The criteria is as follows.
If you can fit a shim thicker than 1mm into a gap, it’s a fail.
If you can just about squeeze a 1mm shim into the gap, it’s a pass. (This is the thickness of a 30cm / 12 inch Ruler)
If you can fit a 0.5mm shim into the gap, it’s a merit (Usually the thickness of a 15cm / 6 inch Ruler)
Anything tighter than this is deemed to be distinction quality, for a beginner at least. In due course we would expect the joints to be seamless.
Best of luck!
Get the FREE Plans for the Practice Frame here: https://mattestlea.com/product/practice-joint-frame-plans/
A plough plane blade is relatively thin, thus is much the same as sharpening a chisel. Learn how to sharpen one here!
This video teaches you how to create a cambered blade for your handplane. An indispensable addition when edge jointing.
Surely you just push it, right? Wrong. There is a lot that goes into the simple task of planing. Body positioning, pressure, and movement are all essential to getting the most accuracy from this task. Watch this to learn how.
Supporting Material
Click the images below to see supporting material helping you with this part of the project.
Have you got the plans yet?
Want to try another project?
Click the images below to find more free lessons to great builds!
